718 plastic mold, the quenching temperature is different? Plastic mold quenching temperature below: plastic mold steel S136: 1025 degrees oil, air-cooled Plastic mould manufacturers plastic mold steel NAK80: pre-hardened, no quenching; mold steel 718: pre-hardened, no quenching; Mold steel SKD61: 1030 degrees, oil, air-cooled; plastic mold SKD11: 1025 degrees, oil, air-cooled plastic mold steel hardnessContinue reading “What is the quenching temperature of 718 plastic mold”
Monthly Archives: February 2020
It can prevent the phenomenon of wire pulling and flowing when opening the mold
First, the advantages of the hot runner nozzle: (1) no residue in the gate is left on the product, and the trace at the gate is smooth; (2) the gate with a larger diameter can be used to accelerate the filling of the cavity, and Further reduce the injection pressure and reduce product deformation. (3)Continue reading “It can prevent the phenomenon of wire pulling and flowing when opening the mold”
The choice of the mold factory is quite important.
What issues must I pay attention to when choosing the right mold factory?The choice of the mold factory is quite important. The industry has always said the same sentence: half of the success of a good mold factory. It can be seen that the importance of the mold factory is self-evident, so how can theContinue reading “The choice of the mold factory is quite important.”
speedinjection 